dehart
04-10-2007, 02:23 PM
I make napkins only a couple times a year and every time I do I have to reinvent the wheel because I've forgotten all the details of my favorite mitered corner technique. So last night I decided to make a sewalong. I was cracking myself up using the piggy fabric for napkins. :D
I like generously sized napkins, so I start with an 18" square of fabric. Flannel is one of my favorites and I also really like linen. I use my ruler to make a line 1¼" from each side on the right side of the fabric and then mark extra dark at the corner intersections so that mark can also be seen from the wrong side of the fabric.
http://www.sewingmamas.com/b/gallery/data/576/napkina1.jpg
Then I finish the edges by serging, not cutting anything off. This isn't necessary, but I like to use my favorite corner turning technique (thanks to Marcey/lovebugsmom for this). Go one stitch off the edge...
http://www.sewingmamas.com/b/gallery/data/576/napkinb1.jpg
pull the threads to the back and off of the stitch fingers...
http://www.sewingmamas.com/b/gallery/data/576/napkinc1.jpg
turn the fabric 90 degrees and line it up so the first stitch will be right on the edge of the fabric. I like to take up the slack of the threads by pulling them back toward the spools (this trick courtesy of Heather/xheathers).
http://www.sewingmamas.com/b/gallery/data/576/napkind1.jpg
Press the serged edge under, this pressed edge will come in handy later.
http://www.sewingmamas.com/b/gallery/data/576/napkine1.jpg
Now let's miter the corners. Fold and press each corner so the serging lines up. Can you see the blue dot at the bottom, it should be right on the pressed fold.
http://www.sewingmamas.com/b/gallery/data/576/napkinf1.jpg
Now you'll fold at that blue dot, still keeping the serged edges lining up. Mark from the blue dot up to the serged edge, this will be your stitching line.
http://www.sewingmamas.com/b/gallery/data/576/napking1.jpg
Stitch the corners up to, but not over, the serged edge
http://www.sewingmamas.com/b/gallery/data/576/napkinh1.jpg
and trim the excess.
http://www.sewingmamas.com/b/gallery/data/576/napkini1.jpg
gently push out your corners, press the edges under, the blue line should be right on the edge, then repress the serged edge under.
http://www.sewingmamas.com/b/gallery/data/576/napkinj1.jpg
Now take your napkin to the machine and sew all the way around. If you pivot at the corners when your needle is exactly in the mitered seam, you'll be perfectly lined up to start the next side.
http://www.sewingmamas.com/b/gallery/data/576/napkinm1.jpg
Voilą, a finished napkin with perfectly mitered corners!
http://www.sewingmamas.com/b/gallery/data/576/napkinn1.jpg
I like generously sized napkins, so I start with an 18" square of fabric. Flannel is one of my favorites and I also really like linen. I use my ruler to make a line 1¼" from each side on the right side of the fabric and then mark extra dark at the corner intersections so that mark can also be seen from the wrong side of the fabric.
http://www.sewingmamas.com/b/gallery/data/576/napkina1.jpg
Then I finish the edges by serging, not cutting anything off. This isn't necessary, but I like to use my favorite corner turning technique (thanks to Marcey/lovebugsmom for this). Go one stitch off the edge...
http://www.sewingmamas.com/b/gallery/data/576/napkinb1.jpg
pull the threads to the back and off of the stitch fingers...
http://www.sewingmamas.com/b/gallery/data/576/napkinc1.jpg
turn the fabric 90 degrees and line it up so the first stitch will be right on the edge of the fabric. I like to take up the slack of the threads by pulling them back toward the spools (this trick courtesy of Heather/xheathers).
http://www.sewingmamas.com/b/gallery/data/576/napkind1.jpg
Press the serged edge under, this pressed edge will come in handy later.
http://www.sewingmamas.com/b/gallery/data/576/napkine1.jpg
Now let's miter the corners. Fold and press each corner so the serging lines up. Can you see the blue dot at the bottom, it should be right on the pressed fold.
http://www.sewingmamas.com/b/gallery/data/576/napkinf1.jpg
Now you'll fold at that blue dot, still keeping the serged edges lining up. Mark from the blue dot up to the serged edge, this will be your stitching line.
http://www.sewingmamas.com/b/gallery/data/576/napking1.jpg
Stitch the corners up to, but not over, the serged edge
http://www.sewingmamas.com/b/gallery/data/576/napkinh1.jpg
and trim the excess.
http://www.sewingmamas.com/b/gallery/data/576/napkini1.jpg
gently push out your corners, press the edges under, the blue line should be right on the edge, then repress the serged edge under.
http://www.sewingmamas.com/b/gallery/data/576/napkinj1.jpg
Now take your napkin to the machine and sew all the way around. If you pivot at the corners when your needle is exactly in the mitered seam, you'll be perfectly lined up to start the next side.
http://www.sewingmamas.com/b/gallery/data/576/napkinm1.jpg
Voilą, a finished napkin with perfectly mitered corners!
http://www.sewingmamas.com/b/gallery/data/576/napkinn1.jpg