Mamaof3
02-10-2011, 12:58 PM
All 3 of our littles are picky about their unders, once we find ones that fit well and they like, I try to make as many as I can. *Sometimes* I can get store bought that they like- here is how I create the pattern used to make more of what they like.
Please note, this can be used for any boxer brief pattern, not just store bought ones.
To start you'll need paper (whatever you use to trace on) pen/pencil or marker and cutting instrument, as well as the boxers to base the pattern off of.
http://i264.photobucket.com/albums/ii186/forsaleonly/074.jpg
Lay the boxers flat- front facing up and trace the center panel- seams and all
http://i264.photobucket.com/albums/ii186/forsaleonly/077-1.jpg
Next, leaving the boxers facing up, trace from the center panel to the side edge, do not cut this out yet
http://i264.photobucket.com/albums/ii186/forsaleonly/079-2.jpg
http://i264.photobucket.com/albums/ii186/forsaleonly/081-2.jpg
Next, flip the boxers over so the back is facing up, place the tracing from the front side panel against the back edge of the boxers and trace to the center of the back
http://i264.photobucket.com/albums/ii186/forsaleonly/082-1.jpg
http://i264.photobucket.com/albums/ii186/forsaleonly/083-2.jpg
Tape the pieces for the front side panel and half back side together, if necessary- you now have your pattern, which will be cut on the fold (back)
http://i264.photobucket.com/albums/ii186/forsaleonly/083-2.jpg
Cut out your fabric, using your pattern. Cut one each of the center panel and one on the fold of the front side and rear pieces. Also, cut a waist band for encased elastic or a piece of underwear elastic or FOE for the waist. Pictured is FOE.
http://i264.photobucket.com/albums/ii186/forsaleonly/086-1.jpg
I used white top thread and black bobbin thread, so it would be easier to see the seams. These can easily be serged as well.
Zig zag or serge the front center panel to main body piece- right sides together- on both sides of the center panel (pictured- the seam on the left is already done, on the right is the opposite side being stitched)
http://i264.photobucket.com/albums/ii186/forsaleonly/088-1.jpg
Once each side of the center panel is done, turn the briefs right side out and top stitch the center seams. Be sure to flip the seam in the same direction on both sides (not a huge deal, but cosmetically it matters)
http://i264.photobucket.com/albums/ii186/forsaleonly/089-1.jpg
http://i264.photobucket.com/albums/ii186/forsaleonly/090-1.jpg
Turn the briefs inside out and stitch the crotch area.
I use stitch "M" on my machine
http://i264.photobucket.com/albums/ii186/forsaleonly/091-1.jpg
Turn them right side out and top stitch the legs
http://i264.photobucket.com/albums/ii186/forsaleonly/092.jpg
Add FOE to the waist, add the size/care tags now as well.
http://i264.photobucket.com/albums/ii186/forsaleonly/093-1.jpg
Finished product. DS2 said the store boughts were a little big, so I didn't add seam allowance to the new ones.
http://i264.photobucket.com/albums/ii186/forsaleonly/095-1.jpg
If anything is unclear, please let me know.
Please note, this can be used for any boxer brief pattern, not just store bought ones.
To start you'll need paper (whatever you use to trace on) pen/pencil or marker and cutting instrument, as well as the boxers to base the pattern off of.
http://i264.photobucket.com/albums/ii186/forsaleonly/074.jpg
Lay the boxers flat- front facing up and trace the center panel- seams and all
http://i264.photobucket.com/albums/ii186/forsaleonly/077-1.jpg
Next, leaving the boxers facing up, trace from the center panel to the side edge, do not cut this out yet
http://i264.photobucket.com/albums/ii186/forsaleonly/079-2.jpg
http://i264.photobucket.com/albums/ii186/forsaleonly/081-2.jpg
Next, flip the boxers over so the back is facing up, place the tracing from the front side panel against the back edge of the boxers and trace to the center of the back
http://i264.photobucket.com/albums/ii186/forsaleonly/082-1.jpg
http://i264.photobucket.com/albums/ii186/forsaleonly/083-2.jpg
Tape the pieces for the front side panel and half back side together, if necessary- you now have your pattern, which will be cut on the fold (back)
http://i264.photobucket.com/albums/ii186/forsaleonly/083-2.jpg
Cut out your fabric, using your pattern. Cut one each of the center panel and one on the fold of the front side and rear pieces. Also, cut a waist band for encased elastic or a piece of underwear elastic or FOE for the waist. Pictured is FOE.
http://i264.photobucket.com/albums/ii186/forsaleonly/086-1.jpg
I used white top thread and black bobbin thread, so it would be easier to see the seams. These can easily be serged as well.
Zig zag or serge the front center panel to main body piece- right sides together- on both sides of the center panel (pictured- the seam on the left is already done, on the right is the opposite side being stitched)
http://i264.photobucket.com/albums/ii186/forsaleonly/088-1.jpg
Once each side of the center panel is done, turn the briefs right side out and top stitch the center seams. Be sure to flip the seam in the same direction on both sides (not a huge deal, but cosmetically it matters)
http://i264.photobucket.com/albums/ii186/forsaleonly/089-1.jpg
http://i264.photobucket.com/albums/ii186/forsaleonly/090-1.jpg
Turn the briefs inside out and stitch the crotch area.
I use stitch "M" on my machine
http://i264.photobucket.com/albums/ii186/forsaleonly/091-1.jpg
Turn them right side out and top stitch the legs
http://i264.photobucket.com/albums/ii186/forsaleonly/092.jpg
Add FOE to the waist, add the size/care tags now as well.
http://i264.photobucket.com/albums/ii186/forsaleonly/093-1.jpg
Finished product. DS2 said the store boughts were a little big, so I didn't add seam allowance to the new ones.
http://i264.photobucket.com/albums/ii186/forsaleonly/095-1.jpg
If anything is unclear, please let me know.