that*darn*kat
09-13-2010, 08:36 PM
In this sew-along I'll show you how to add a bib-front embellishment to any of your favorite tee-shirt patterns. This boutique-style detail is a great way to incorporate your favorite woven prints in an easy-to-wear knit top.
http://img.photobucket.com/albums/v443/mrs489/IMG_0018-1.jpg
First, you'll cut the pieces for your top; front, back and sleeves. You can make this short or long sleeved. I have chosen a fitted puffed-sleeve style top for this sew-along.
http://img.photobucket.com/albums/v443/mrs489/IMG_0002-9.jpg
Next, you'll use a measuring device to decide how long and wide you'll want to cut your main fabric. I chose to have my bib 6 inches below the center front neck, and one inch onto the shoulder seam. My measurements are 9 inches wide by 10 inches long (I'm making a size 134 top, obviously this can vary tremendously depending on the size of top you're making).
http://img.photobucket.com/albums/v443/mrs489/IMG_0003-9.jpg
Next, you'll cut a strip of the accent fabric for the "button placket". You'll need a piece 1.75" wide and as long as your main fabric.
http://img.photobucket.com/albums/v443/mrs489/IMG_0004-7.jpg
Now, with my main fabric folded on the center front, I'm going to round the edges. I'm using a plate to make a nice curve (after deciding the bowl was too small).
http://img.photobucket.com/albums/v443/mrs489/IMG_0005-10.jpg
Yes, I like that shape...
http://img.photobucket.com/albums/v443/mrs489/IMG_0006-8.jpg
Take your accent fabric to the ironing board, and press back each side 1/4". Line up the button placket on the bib, making sure it's centered.
http://img.photobucket.com/albums/v443/mrs489/IMG_0007-7.jpg
Topstitch the button placket to the bib close to each side.
http://img.photobucket.com/albums/v443/mrs489/IMG_0008-4.jpg
I'm using some ruffled elastic trim to edge my bib. You can use rick-rack or a ruffled strip of fabric in the same way. Sew it along the edge of the bib with the ruffled edge facing to the middle, using a 1/4" seam allowance.
http://img.photobucket.com/albums/v443/mrs489/IMG_0009-4.jpg
Now, you'll press the raw edges behind the bib.
http://img.photobucket.com/albums/v443/mrs489/IMG_0010-5.jpg
Here I've placed my bib behind the cut front of my tee, and I've traced the shape of the shirt front onto the bib. Cut away the excess fabric from the neckline.
http://img.photobucket.com/albums/v443/mrs489/IMG_0011-4.jpg
Mark the placements for your buttons and sew them on. When placing buttons, keep in mind that you'll be sewing the neck binding on later, so leave plenty of room for that at the top.
http://img.photobucket.com/albums/v443/mrs489/IMG_0012-2.jpg
Place the bib centered on the front of the tee, and pin in place at the edges.
http://img.photobucket.com/albums/v443/mrs489/IMG_0013-1.jpg
Topstitch along the edge of the bib, and baste the two layers together at the neckline.
http://img.photobucket.com/albums/v443/mrs489/IMG_0014-1.jpg
Now that your front panel is embellished, you can continue sewing your tee according to the directions. One thing to keep in mind is that the woven on the front of the tee will make it less stretchy, so I recommend trying it on your child to make sure it fits over the head before binding. You may want to make the neckline a bit wider than you normally would for a knit tee, and you may cut your neck binding strip a tad longer to account for the lack of stretch at the front panel.
http://img.photobucket.com/albums/v443/mrs489/IMG_0017-2.jpg
All done!
http://img.photobucket.com/albums/v443/mrs489/IMG_0018-1.jpg
First, you'll cut the pieces for your top; front, back and sleeves. You can make this short or long sleeved. I have chosen a fitted puffed-sleeve style top for this sew-along.
http://img.photobucket.com/albums/v443/mrs489/IMG_0002-9.jpg
Next, you'll use a measuring device to decide how long and wide you'll want to cut your main fabric. I chose to have my bib 6 inches below the center front neck, and one inch onto the shoulder seam. My measurements are 9 inches wide by 10 inches long (I'm making a size 134 top, obviously this can vary tremendously depending on the size of top you're making).
http://img.photobucket.com/albums/v443/mrs489/IMG_0003-9.jpg
Next, you'll cut a strip of the accent fabric for the "button placket". You'll need a piece 1.75" wide and as long as your main fabric.
http://img.photobucket.com/albums/v443/mrs489/IMG_0004-7.jpg
Now, with my main fabric folded on the center front, I'm going to round the edges. I'm using a plate to make a nice curve (after deciding the bowl was too small).
http://img.photobucket.com/albums/v443/mrs489/IMG_0005-10.jpg
Yes, I like that shape...
http://img.photobucket.com/albums/v443/mrs489/IMG_0006-8.jpg
Take your accent fabric to the ironing board, and press back each side 1/4". Line up the button placket on the bib, making sure it's centered.
http://img.photobucket.com/albums/v443/mrs489/IMG_0007-7.jpg
Topstitch the button placket to the bib close to each side.
http://img.photobucket.com/albums/v443/mrs489/IMG_0008-4.jpg
I'm using some ruffled elastic trim to edge my bib. You can use rick-rack or a ruffled strip of fabric in the same way. Sew it along the edge of the bib with the ruffled edge facing to the middle, using a 1/4" seam allowance.
http://img.photobucket.com/albums/v443/mrs489/IMG_0009-4.jpg
Now, you'll press the raw edges behind the bib.
http://img.photobucket.com/albums/v443/mrs489/IMG_0010-5.jpg
Here I've placed my bib behind the cut front of my tee, and I've traced the shape of the shirt front onto the bib. Cut away the excess fabric from the neckline.
http://img.photobucket.com/albums/v443/mrs489/IMG_0011-4.jpg
Mark the placements for your buttons and sew them on. When placing buttons, keep in mind that you'll be sewing the neck binding on later, so leave plenty of room for that at the top.
http://img.photobucket.com/albums/v443/mrs489/IMG_0012-2.jpg
Place the bib centered on the front of the tee, and pin in place at the edges.
http://img.photobucket.com/albums/v443/mrs489/IMG_0013-1.jpg
Topstitch along the edge of the bib, and baste the two layers together at the neckline.
http://img.photobucket.com/albums/v443/mrs489/IMG_0014-1.jpg
Now that your front panel is embellished, you can continue sewing your tee according to the directions. One thing to keep in mind is that the woven on the front of the tee will make it less stretchy, so I recommend trying it on your child to make sure it fits over the head before binding. You may want to make the neckline a bit wider than you normally would for a knit tee, and you may cut your neck binding strip a tad longer to account for the lack of stretch at the front panel.
http://img.photobucket.com/albums/v443/mrs489/IMG_0017-2.jpg
All done!